BioRePeelCl3 FND (6ml)

BioRePeelCl3 FND is a very effective and revitalizing peeling that moisturizes and protects the skin on the face, neck and décolleté

The peeling is only applied externally and does not require an injection.

BioRePeelCl3 FND combats acne, superficial scars and dead skin cells. Thanks to its unique ingredients, it has a moisturizing and revitalizing effect on the skin. The acidic peeling is used on the face, neck and décolleté. It not only moisturizes these areas. BioRePeelCl3 FND also protects the skin from dryness. This regenerates the skin in certain areas. In addition, the peeling prevents the formation of new scars and the recurrence of excessive acne. After just a few treatments, the skin appears fresher and, above all, more youthful.

What makes BioRePeelCl3 FND so effective?

BioRePeelCl3 FND works on the basis of various effective acids, which in combination promote the regeneration of the skin. Injuries, light or young scars or even signs of acne can thus be minimized. The peeling is also ideal for damaged and dead skin cells as well as dry skin. Overall, the peeling results in a revitalized and youthful-looking complexion. Skin that appears free from UV damage, fine lines and other damage and signs of ageing.

In addition, this product can also prevent the formation of new, superficial scars and relapses of acne. The skin remains sustainably clarified and protected. The moisturizing effect makes the skin feel pleasant and gives it an invigorating appearance. Just a few sessions are enough to inspire patients with the effects of BioRePeelCl3 FND. This can happen with BioRePeel after just four weeks. Patients can therefore enjoy regenerated and fresh skin, depending on the condition of the skin and the sensitivity of the product.

The steps of a perfect BioRePeelCl3 treatment

Recommendation: Preparation for the BioRePeel application - 4EVER Universal Pre-Treatment Kit
The 4EVER pre-treatment kit is a specially developed range of products designed to prepare the skin for medical aesthetic or dermatological procedures such as the BioRePeelCl₃® protocol:

1. Apply and massage in the lipogel. Avoid contact with eyes and mucous membranes.
2. Spray the Activator onto the treated area and massage it in with circular movements until a white solution forms
3. Remove the product with a moistened swab or cotton pad.
4. Apply an even layer of the peel-off mask and leave to absorb for 5 minutes.
5. Then spray the Activator onto the absorbed mask and wait until a firm layer has formed.
6. Carefully remove the peel-off mask from the face. Start removing the mask from the corners inwards.

BioRePeelCl3 Treatment

Step 1: Preparation of the BioRePeelCl3
Before using the two acid peelings BioRePeel FND and BioRePeel BODY, they should each be shaken vigorously for a few seconds. A green emulsion forms. After this shaking, the product is ready for use.

Step 2: Treatment with the BioRePeelCl3 FND and the BioRePeelCl3 BODY
The required amount can now be removed from the ampoule using an injection needle. The affected area of the body should be cleaned well beforehand. The respective peeling can then be massaged in with a nitrile glove until the peeling takes on a sticky consistency on the skin and the glove sticks.
The exposure time for the scrubs is two to five minutes for the FND and three to ten minutes for the BODY. After the application time, the peeling is removed from the face with a slightly damp swab.

Step 3: Follow-up treatment with BioReHydra or BioReLift
After the BioRePeel treatment, the affected areas should be cared for or neutralized. This can be done either with the BioReHydra after serum or with the BioReLift after-treatment cream. One of the products is applied and massaged in. This protects and maintains the peeling results in the long term.

FAQ about BioRePeelCl3 FND

On which areas can BioRePeelCl3 FND be used?
This product is suitable for the following areas: Face, neck, décolleté. It can also be used for acne treatments

What does the peeling consist of?
The FND peeling contains the following ingredients, among others: trichloroacetic acid, tartaric acid, citric acid, salicylic acid, lactobionic acid, gamma-aminobutyric acid, arginine, proline, hydroxyproline, ascorbyl glucoside, riboflavin, isopropyl myristate and squalane.

What is contained in one package?
One ampoule with 6 ml.

What dose of BioRePeelCl3 FND should be used for each treatment area?
The dose that should be used varies depending on the treatment area.
Face: 1.5 to 2 ml, neck: 1 to 1.5 ml, décolleté: 2 to 2.5 ml.

In which application cycle should the peeling be applied?
Four to six sessions are recommended. These should be carried out seven to ten days apart.